Sunday, July 21, 2019

Internet As An Information Source Information Technology Essay

Internet As An Information Source Information Technology Essay The Internet is a network of networks that consists of millions of smaller domestic, academic, business, and government networks. Internet is also described as the worldwide publicly accessible network of interconnected computer networks that transmit data by packet switching using the standard Internet Protocol (IP). Internet is the transport vehicle for the information stored in files or documents on another computer. It carries together various information and services, such as electronic mail, online chat, file transfer, and the interlinked Web pages and other documents of the World Wide Web. The Internet itself does not contain information, it is a slight misstatement to say a document was found on the Internet. It would be more correct to say it was found through or using the Internet. What it was found in (or on) is one of the computers linked to the Internet. Every aspect of our day to day life is affected by the internet. Whether it is shopping, business, banking, communication, paying your bills, social gathering, party, learning, education etc. Internet is everywhere, knocking at our door, making our life easier and smooth. Moreover, when it comes to education and research internet is paving way for a great leap and sure library and information centers has no exception. The internet made the information on our finger tips. The libraries of the developed world has adopted the internet facilities to provide the fast and better library services to its patron but this is not the case with many developing nations and third world countries. The libraries of the third world countries still do not have the basic internet access facilities in many cases because of the poor funding and budget crisis, while we are talking about web 2.0 in countries like United States, Europe and other developed nations. This paper has also tried to explore broadl y the importance of internet with regard to access of information sources and its utilities for library patrons in academic organizations and institutions. Aligarh Muslim University (AMU) is a residential academic institution located in the city of Aligarh, Uttar Pradesh, India. Originally it was Mohammedan Anglo-Oriental College, which was founded by a great Muslim social reformer Sir Syed Ahmed Khan in 1875 and in 1920 it was granted a status of Central University by an Act of Indian Parliament. Modelled on the University of Cambridge, it was among the first institutions of higher learning set up during the British Raj. Aligarh Muslim University offers more than 250 courses in traditional and modern branch of education. The University is open to all irrespective of caste, creed, religion or gender. For more information please logon to university website: www.amu.ac.in. Literature Review Pangannaya, N.B. (2000) conducted a study i.e. Use of Internet by the Academic Community: a Case Study. This paper is an attempt to investigate the use of internet resources by the academic community of Mysore University, using survey as the research tool. The paper has investigated the faculty wise frequency and length of use of the internet. Moreover, it describes the emergence of internet, has revolutionized the academic world. Darries, Fatima (2004) has discussed various issues related to internet based reference services under the given title Internet access and use in reference services in higher education institutions in South Africa. An electronic survey was conducted using the web and e-mail to distribute the questionnaire. The target population was the heads of reference services at large libraries and the directors at smaller libraries of the 36 higher education institutions in South Africa. The response rate to the questionnaire was 28 (30.4 %); two returned questionnaires were spoilt. These results showed that all libraries surveyed have Internet access, and all but one provided access to their users. Librarians had access to the Internet for a longer period than their users. User internet training tended to be on a one-to-one basis at the point-of-use. Jay, Margaret and Webber, Sheila (2005) conducted a research study under the title Impact of the internet on delivery of reference services in English public libraries The study aims to investigate the impact of the internet on reference services in public libraries in England. A questionnaire was administered in 2003 to a sample of the public library authorities in England, investigating the use of the internet for receiving or answering reference enquiries, the use of electronic reference sources, and the nature of public library web sites. The paper concludes by identifying the need for public library managers to assess the changing role of professionals and Para-professionals in delivering reference services, and to provide appropriate training. It also notes that despite the discussion of real-time reference, asynchronous digital reference is still more common in England. The above table 4.7 clearly shows the results about the users satisfaction level with internet based information services when compare to print medium. The above table shows that 41 i.e. (45.05%) users are highly satisfied with the internet based information services in comparison to print sources. On the other hand 36 i.e. (39.65%) users have given the average rating to the internet as a source of information access compare to printed sources, while 14 i.e. (15.38%) users are very highly satisfied with internet based information services. The investigators have tried to find out problems pertaining to internet access among the research scholars PG students of the Science faculty in AMU. The investigators find out the major problems and hindrance in this regard shown in the table No. 4.8. The great response in this section is about the slow internet speed. 72 i.e. (47.68%) users complained about the slow internet speed, 28 i.e. (18.54%) users feel that there are lack of sufficient internet connected terminals in the department / library, which hinders them to properly utilize their time at the optimum level. Moreover 19 i.e. (12.58%) users face the problem of too many hits or information overload, 17 i.e. (11.25%) reported about the problem of the missing link / broken link. In addition to that, 12 i.e. (7.94%) users feels that the staff in the computer section of department / library are not technically very sound and therefore needs training and sound technical knowledge. 3 i.e. (1.98%) users complained about the ir relevant retrieval or lack of precision while trying to find out relevant information on the Internet. The investigators clearly find that the most of the research Scholars PG students have the internet access facility in their departments. They also find out that the users from science faculty access the internet on various locations, most of the users are using internet in the departments and in the university central library. They are also browsing the internet in the university computer centre. They are going least to cyber cafes for using internet. The present study also says that the most of the research scholars PG students of the science faculty are exploiting the internet services for their research work. Apart from that they are using internet for keeping themselves abreast with the latest development in the world, for communication purposes, and to search the career development information. Most of the research scholars PG students are using the J-gateway to access the various online journals either from the respective departments, central library browsing section, or fr om the university computer centre. Moreover, the present study states that the print information sources have been affected due to the use of internet based information services in the science faculty and the users satisfaction is quite high vis-Ã  -vis print sources of information. In addition to that, research scholars PG students find Internet based information services easy to use. It is clear from the present study that most of the users utilize the internet for searching the subject oriented information. Apart from that, majority of the users are satisfied with the accuracy of the internet based information sources.

The Lightweight Cars Competitors And Their Structures Engineering Essay

The Lightweight Cars Competitors And Their Structures Engineering Essay The Atom prototype chassis was tested to determine the value of its global torsional stiffness. This value was calculated to be 1330Nm/deg. This value was to be improved upon by the following method: The creation of a Finite Element baseline validation model using MSC Patran/Nastran software compared favourably with the physical test results with a torsional stiffness value of 1352Nm/deg for a mass of 47 Kg and an efficiency of 88g/Nm/deg. The discussed modifications had been suggested to Atom upon initial appraisal of the chassis were incorporated into this baseline model and resulted in increases in both torsional stiffness and efficiency. Further, the design improvement study performed resulted in a maximum torsional stiffness of 6448Nm/deg, an increase of 377% over the baseline model. A maximum increase in efficiency of 286% to 23g/Nm/deg for a mass of 148.3Kg accompanied this increase in torsional stiffness. Following optimisation of the model to gain minimum mass for a stiffness of 6000Nm/deg a torsional stiffness of 6030Nm/deg was realised for a mass of 127Kg, giving an increase in efficiency of 322% over the baseline model to 20.99g/Nm/deg. ACKNOLEDGMENTS First, I would like to thank my parents for their support and encouragement throughout my university career. I would like to sincerely thank my supervisor Mr. Mike Dickison for his continual support and enthusiasm for this thesis. Thanks to Brunthinthorpe Car Ltd for providing a very interesting design project and great support throughout. Finally, a special thanks to all my friends at Coventry who have made this such a great year. INTRODUCTION 1.1 Bruntingthorpe Sports Cars Ltd Bruntingthorpe Sports Cars Ltd has been involved in the Lightweight car industry for a number of years. They have produced work for many other companies. 1.2 Aims of Project The purpose of the design project: To perform a torsion test on the prototype chassis to determine its torsional stiffness; To create a finite element model of the chassis; To incorporate a design improvement study and note the effects on the global torsional stiffness of the chassis; To attempt an optimisation for maximum efficiency. The following limitations are given for this project: The body shape is fixed and therefore the overall external shape of the chassis must not be altered; Overview of Chassis Types Definition of a Chassis The chassis is the framework to which everything is attached in a vehicle. In a modern vehicle, it is expected to fulfil the following functions: Provide mounting points for the suspensions, the steering mechanism, the engine and gearbox, the final drive, the fuel tank and the seating for the occupants; Provide rigidity for accurate handling; Protect the occupants against external impact. While fulfilling these functions, the chassis should be light enough to reduce inertia and offer satisfactory performance. It should also be tough enough to resist fatigue loads that are produced due to the interaction between the driver, the engine and power transmission and the road. Ladder frame The history of the ladder frame chassis dates back to the times of the horse drawn carriage. It was used for the construction of body on chassis vehicles, which meant a separately constructed body was mounted on a rolling chassis. The chassis consisted of two parallel beams mounted down each side of the car where the front and rear axles were leaf sprung beam axles. The beams were mainly channel sections with lateral cross members, hence the name. The main factor influencing the design was resistance to bending but there was no consideration of torsional stiffness. A ladder frame acts as a grillage structure with the beams resisting the shear forces and bending loads. To increase the torsional stiffness of the ladder chassis cruciform bracing was added in the 1930s. The torque in the chassis is reacted by placing the cruciform members in bending, although the connections between the beams and the cruciform must be rigid. Ladder frames were used in car construction until the 1950s but in racing only until the mid 1930s . A typical ladder frame is shown below. ladder Fig. 1 [Ref. 2] Twin tube The ladder frame chassis became obsolete in the mid 1930s with the advent of all-round independent suspension, pioneered by Mercedes Benz and Auto Union. The suspension was unable to operate effectively due to the lack of torsional stiffness. The ladder frame was modified to overcome these failings by making the side rails deeper and boxing them. A closed section has approximately one thousand times the torsional stiffness of an open section. Mercedes initially chose rectangular section, later switching to oval section, which has high torsional stiffness and high bending stiffness due to increased section depth, while Auto Union used tubular section. The original Mercedes design was further improved by mounting the cross members through the side rails and welding on both sides. The efficiency of twin tube chassis is usually low due to the weight of the large tubes. They were still in use into the 1950s, the 1958 Lister-Jaguar being an example of this type . Fig. 2 [Ref. 2] Four tube As designers sought to improve the bending stiffness of a chassis, the twin tube chassis evolved into the four tube chassis. The original twin tube design was modified by adding two more longitudinal tubes that ran from the front of the car, around the cockpit opening and on to the rear of the car. The top and bottom side rails are connected by vertical or diagonal members, essentially creating a very deep side rail and thus improving the bending characteristics. The two sides are joined by a series of bulkheads, normally located at the front, footwells, dash area, seatback, and rear of the chassis. A significant increase in bending stiffness was realised but there is little increase in the torsional stiffness due to the lack of triangulation causing lozenge of the bays. lotus21formula1_1961 Fig. 3 Lotus 21 [Ref. 4] Backbone The backbone chassis has a long history in automobile design with its origins credited to Hans Ledwinka, an engineer with Czech automaker Tatra. Ferdinand Porsche worked with Ledwinka in the 1920s and arguably learned much of his craft from him. When a chassis derives its torsional stiffness from one large central tube running the length of the car, the resistance to twist depends almost entirely on the cross-sectional area of that tube. Clearly, that cross section can be much larger than the typical drive shaft tunnel. Depending on the vehicle configuration it is possible to arrange for an approximately rectangular tube of substantial dimensions. This arrangement fits in well with conventional side-by-side seating, with the large central spine forming a centre console. Such an arrangement was utilised by Colin Chapman on the Lotus Elan . backbone_elan_1962 Fig. 4 1962 Lotus Elan backbone chassis [Ref.4] Spaceframe Although the spaceframe demonstrated a logical development of the four-tube chassis, the space frame differs in several key areas and offers enormous advantages over its predecessors. A spaceframe is one in which many straight tubes are arranged so that the loads experienced all act in either tension or compression. This is a major advantage, since none of the tubes are subject to a bending load. Since space frames are inherently stiff in torsion, very little material is needed so they can be lightweight. The growing realisation of the need for increased chassis torsional stiffness in the years following World War II led to the space frame, or a variation of it, becoming universal among European road race cars following its appearance on both the Lotus Mk IV and the Mercedes 300 SL in 1952. While these cars were not strictly the first to use space frames, they were widely successful, and the attention they received popularised the idea. lotusmarkVI_1952 Fig. 5 1952 Lotus Mk.IV spaceframe Stressed skin The next logical step for chassis development was the stressed skin design. This is more difficult to construct than a spaceframe with the accurate folding, forming, drilling and riveting of sheet steel or modern composite materials. The lessons learnt in the aircraft industry do not usually apply directly in automotive practice. The loads on aircraft are widely distributed the lift that holds a plane up, for example, is spread over the entire area of its wings. On a race/sports car, the loads are much more concentrated, being focused on the suspension mounting points. Even when a method is developed to accept forces and spread them over a load bearing skin, it becomes extremely inconvenient to make any modifications and may even require a major redesign. Analysis of the stresses in stressed skin construction is more difficult. The continuous surface considerably complicates access for repair or replacement of the cars mechanical components. This may also explain why stressed skin construction was virtually unheard of in race cars before the modern mid-engine configuration. The majority of mid-engine race cars end their stressed skin construction at the back of the cockpit, with either a space frame or the engine itself forming the remainder of the structure. For all these drawbacks, stressed skin construction can potentially outperform any other form of race car construction in terms of torsional stiffness. Load Cases A chassis is subjected to three load cases: bending, torsion and dynamic loads. The bending (vertical symmetrical) load case occurs when both wheels on one axle of the vehicle encounter a symmetrical bump simultaneously. The suspension on this axle is displaced, and the compression of the springs causes an upward force on the suspension mounting points. This applies a bending moment to the chassis about a lateral axis. bending Fig. 6 Bending Load case [Ref. 2] The torsion (vertical asymmetric) load case occurs when one wheel on an axle strikes a bump. This loads the chassis in torsion as well as bending. It has been found both in theory and in practice that torsion is a more severe load case than bending. torsion2 Fig. 7 Torsion Load case [Ref. 2] The dynamic load case comprises longitudinal and lateral loads during acceleration, braking and cornering. These loads are usually ignored when analysing structural performance. A torsionally stiff chassis offers a number of advantages: According to vehicle dynamics principles for predictable and safe handling the geometry of the suspension and steering must remain as designed. For instance the camber, castor and toe angles could change with torsional twist or the steering geometry could change causing bump steer. Once again according to vehicle dynamics principles a suspension should be stiff and well damped to obtain good handling. To this end the front suspension, chassis and the rear suspension can be seen as three springs in series as shown in Fig. 8. If the chassis is not sufficiently stiff in torsion then any advantages gained by stiff suspension will be lost. Furthermore, a chassis without adequate stiffness can make the suspension and handling unpredictable, as it acts as an undamped spring. Rear Suspension Front Suspension Chassis Fig. 8 Chassis and suspension as springs Movement of the chassis can also cause squeaks and rattles, which are unacceptable in modern vehicles. Simple Structural Surfaces: The simple structural surfaces method SSS originated from the work of Pawlowski and is described in the notes by Brown and the book by Brown, Robertson and Serpento. These references should be consulted for a thorough understanding of this approach. The SSS method provides a simple way of determining load paths through a structure. Each surface is assumed only to have in-plane stiffness and no out-of-plane stiffness. Each surface is acted on by forces, e.g. the engine mounts. For equilibrium, adjacent surfaces must provide reactions. This process is continued throughout the structure and determines the load on each SSS. It can then be realised if an SSS has insufficient supports or reactions and therefore determines the continuity of load paths and the structures overall integrity. ssssss Fig. 9 [Ref. 2] Fig. 10 [Ref. 2] As can be seen in the SSS example in Fig. 9 the box structure is loaded in torsion by the moment Ms, which causes the shear forces Q1 and Q3. All the surfaces are in complementary shear, and the structure is stiff in torsion. If one shear surface is removed, none of the complementary shear forces can exist. The torsion load is then transferred to the floor of the box via the edge forces Q, so the floor panel is loaded out of plane rather than in complementary shear The Lightweight cars competitors and their structures Atom Car Atom car is a brilliant example of the lightweight sports car philosophy. You strip out all the heavy crap that sits in the big fat sports cars, put in a small, light but powerful engine, and you have something you can have tremendous fun in. The Atom, like its fellow lightweights the Caterhams and the Elises, delivers high thrills for low costs. This is a brilliant weekend car, a trackday car, that you can go very fast in very easily. And I like doing that (on the track obviously) which is why this takes my third and final garage space. Ariel Atom 500 V8 built to celebrate 10th birthday To mark the occasion, Ariel employees assembled an example of their upcoming Ariel Atom 500 V8 high performance car in a personal record of five hours, fifteen minutes. The Ariel Atom 500 V8 is a highly-anticipated ultra light-weight sports car that has been in the making for around two years. The car, although its not your conventional car perse, is more of a superbike with four wheels. Ariel has confirmed the car will use a 500 horsepower thats 373kW V8 in the car that will weigh around 500kg. With a superbike like power-to-weight, the Ariel Atom 500 V8 is sure to be the scariest car ever to hit the market. The engine will be a 32-valve Hartley 3.0 -litre V8 which was derived from merging two Suzuki Hayabusa 1300cc superbike four-cylinder engines together. The engine is said to spin to 16,500rpm, like a superbike. And with a gearbox that allows flat-shifting, like a superbike, Ariel says the car will easily achieve 0-160km/h in under six seconds and go on to a top speed of 270km/ hà ¢Ã¢â€š ¬Ã‚ ¦ like a superbike. In a recent Autocar report, Atom designer Simon Saunders summed up the Atom 500 V8 build in a few words, The GT-R is the daily driven car that performs excellent everywhere. The Zonda F is the supercar for the long exploration trips through Europe. The Atom is the little insane car for scaring the crap out of yourself LOTUS EVORN: http://www.blogcdn.com/green.autoblog.com/media/2008/09/evora-chassis.jpg Lotus is increasingly building on its 60 year history of creating more with less with all its recent efforts on electric and hybrid drive cars. Besides the power train work, Lotus has plenty of experience with lightweight structures. The latest evolution of that is the architecture of the new Evora sports car that debuted at the London Motor Show this summer. Lotus has now won an award for the aluminium chassis of the Evora at the Aluminium 2008 trade fair at Messe Essen in Germany. The Lotus architecture is comprised mainly of aluminium extrusions combined with some casting. The components are in part riveted together but are primarily joined by adhesive bonding. Lotus developed much of the technology while creating the Elise and has created structures with greater strength and lower weight. With the combination of aluminium structures and the expertise that Lotus also has in advanced composites, car makers can tap into a lot of technology to help reduce weight and improve fuel effi ciency. Lotus provides an automotive structure with a unique approach. They combined adhesive bonding techniques with mechanical joining, resulting in innovative and creative solutions. Lotus used their expertise in lightweight materials to complete this structure, achieving a low weight and a high structural stiffness and therefore ensuring a major impact on environmental and sustainable performance. The Lotus Evora demonstrates an accumulation of our core competencies in aluminum and composite body engineering, jointing techniques and vehicle systems integration. Lotus pioneered the technology of bonded aluminum extrusions for use in road vehicles and has successfully developed high performance cars for other car companies around the world. One great advantage of our low volume vehicle architecture technology is that it can be used by one car manufacturer looking to develop a range of niche products, or by a group of car manufacturers looking to share investment, but still retain a high de gree of end product separation. The Evoras chassis is an evolution of the Lotus vehicle architecture from the Lotus aluminum crossover concept vehicle previously showcased at the Geneva Motor show, and allows for the development of a range of vehicles up to a gross vehicle weight of 1,900 kg. This architecture has been designed to be more applicable to mid-volume applications by utilizing low capital investment manufacturing processes. The Evora structure progresses the Lotus bonded and riveted technology used in the Elise family of vehicles with unique extrusions and folded panels, whilst providing contemporary ease of ingress/egress, build modularity and improved, lower cost repairs. The Lotus Evora employs a composite roof as a stressed structural member to give an exceptional vehicle stiffness of 26,000 Nm per degree, thanks in part to the seatbelt anchorage frames secondary function as a roll over structure, and partly because the high-tech composite body panels are stressed it ems. However, despite this high stiffness, the complete chassis and modules weigh just 200 kg (prototype weight), helping to keep the weight of the whole car to just 1350 kg (prototype weight). To deliver this high performance structure, bonded and riveted high grade aluminum extrusions and simple, elegant folded sheet elements are used in the lower structure, which complements the stressed composite roof upper structure. Attached to the high strength central tub are sacrificial energy absorbing sub frames of extruded aluminum at the front and lightweight welded steel at the rear. These sub frame modules also offer advantages in terms of convenience and low cost of repair, and during manufacturing can be brought to the production line fully assembled, ready to be attached to the fully assembled tub. LUSO LM23: Luso Motors is a Portuguese car design and development house which has brought us a lightweight sports car LM 23. This design inspired from the Lotus 23b. The Luso Motors 23 is powered by a 150-horsepower 1.0-litre Honda CBR1000 engine, is mated to a six-speed sequential transmission. According to LusoMotors founder Ernesto Freitas says customers can choose a number of different engines, including a Subaru turbo boxer. This sport car features a steel tube frame chassis, double skin aluminium alloy sheets, riveted and glued with inner foam reinforcements, the outer skin is made out of fibreglass and carbon fibre components. It weighs just 881 pounds, a lightweight sports car, and 150 hp! The car will start at à ¢Ã¢â‚¬Å¡Ã‚ ¬15,000(about $23,600). Deronda G400: (http://www.sportscarzone.com/deronda-g400-a-race-bred-exotic-sports-car/) Close your eyes and build the ultimate two-seat sports car. Start with a lightweight, tube-frame chassis and then add race-bred suspension and oversized brakes. Wrap the vehicle in an aero-inspired carbon fiber body shell, but keep the generous cockpit open for wind-in-your-hair enjoyment. Lastly, wedge a huge, torque-laden, tire-shredding engine into the middle of the chassis, and tune the exhaust note so it scares the gophers out of your neighbors front lawn. Now, open your eyes and take a look at the Deronda G400. We recently had an afternoon with this exceptional hand-built brute in the mountains above Malibu. With a mid-mounted V8 sourced from a Chevrolet Corvette and the curb weight of a Smart fortwo, the Deronda seems powerful enough to move the economy. Whats the story behind the car? Who makes it, and how? Most importantly, can the Deronda be tamed? Read our full adventure after the jump. The Deronda was originally developed in the United Kingdom by Andy Round, a successful aeronautical engineer. Round wanted to purchase a lightweight high-performance road car, but was frustrated and dissatisfied with what he found after looking at offerings from Caterham, Ultima and Westfield. In a bold move, Round decided to build his own sports car using the most advanced components and materials he could get his hands on. Driving dynamics and safety were key priorities, while styling was to be influenced by Formula 1 and Le Mans Series race cars. The first prototype, manufactured by Fabrication Techniques, was called the Deronda F400. Powered by a turbocharged Audi 1.8-liter four-cylinder rated at 210 hp, Rounds new open-cockpit sports car made its debut at the 2004 Auto sport International Racing Car Show in the UK. At this point, Auto sport Development, a North American manufacturer and importer of unique street and race cars, was sufficiently impressed with the engineering and design of the Deronda that it wanted to build it. Discussions ensued, and the company licensed the rights to build and sell the car on this continent. Before production started, the team of engineers at Auto sport made a few changes in order to appeal to American drivers. The small 1.8-liter Audi engine was dropped, and a Corvette-sourced 6.0-liter V-8 took its place. To accommodate the much larger power plant, the team stretched the wheelbase by five inches (increasing overall length by eight inches). The brakes were upgraded, and the suspension was modified to accept the new running gear. The finished product was called the Deronda G400. Available directly from Sirius Motorsports, it is sold turn-key and according to the company, it is 50-state street legal (when licensed as a component car). Each Deronda begins as a pile of two-inch diameter (.095 wall) 4130 chromium molybdenum tubes. Stronger and more durable than standard 1020 steel, chrome moly is steel that has been alloyed with small amounts of chromium and molybdenum to increase its strength. The tubing is precisely cut and placed on a large jig where it is TIG-welded by hand. Safety is principal, so the frame is engineered with double side-impact protection tubing, and double rollover hoops (four in total). Crash structures are built into the front and rear for additional occupant protection. Once complete, the intricate frame weighs 650 pounds bare. A custom suspension, comprised of unequal-length control arms with horizontal mounted shocks, is bolted to the rigid platform. Massive cross-drilled Baer rotors are installed with dual-piston caliper Corvette C5 brakes up front (CNC-milled with the Deronda logo) and single-piston C5 calipers on the rear. Aluminum alloy front wheels measure 18ÃÆ'-9-inches (wearing 235/30R18 rubber), while the rears measure 18ÃÆ'-10-inches (with 285/35R18 tires). Placed mid-engine in the chassis is a new 6.0-liter LS2 engine (as used in the Corvette C6), mated to a durable Porsche G50 five-speed transaxle, with power delivered to the rear wheels. With stock headers, and environmentally-friendly catalytic converters, the engine is rated at 400 hp and 400 lb-ft of torque. A 14-gallon foam-filled ATL fuel cell keeps the power plant fed, and increases safety (a tank-fed fire-suppression system is optional). The exhaust is fitted with a muffler, but it still lets plenty of the engines anger out the back end. The skin of each Deronda is comprised of a mixture of fiberglass and carbon fiber body panels. The head rest, dashboard, rear wing, and fenders are all carbon fiber. Twin minimally-padded fiberglass seats with six-point harnesses are installed, and the windshield is DOT-legal single-piece of laminated glass with a windshield wiper. The entire build process, from tubing to a finished vehicle, takes about eight weeks. The final curb weight is a mere 1,890 pounds. Simple, yet functional, is the best way to describe the cabin. The dashboard presents only the most critical information. While the vehicle obviously lacks doors and a roof, heat arrives from air spilled around the front-mounted radiator. Small vents, not unlike ports found on light private aircraft, are able to bleed fresh air into the foot wells. Modeled with dimensions similar to the Porsche 996, the cockpit is accommodating even for someone who is 62à ¢Ã¢â€š ¬Ã‚ ³ tall or taller. The seats and pedals are both adjustable for a custom fit to accommodate nearly everyone. After a perplexing process of flipping switches and pushing buttons, the brawny V8 spins to life and settles to a smooth idle. Stock Corvette headers dump hot gasses into the cats before they are expelled out twin howitzer-looking mufflers. The sound that penetrates the air is a deep irate rumble that will send chills up your spine. With the clutch fully depressed, we slip the milled aluminum shifter into first gear and slowly release the clutch. Without drama, we pull away. Lacking power steering, the small, flat-bottomed Sparco steering wheel is very heavy at low speeds. The driveway to the main road is steep, but the needle nose of the Deronda offers surprisingly generous ground clearance. As the traffic breaks, we pull into traffic pointing the car down Californias famed Mulholland Drive towards the Santa Monica Mountains. Warned about the power under our right foot, we treat the gas pedal as if it were a made from blown glass we dont need to spin this vehicle just outside the gate. With the road clear, we goose the accelerator. It is immediately apparent that this could be the quickest car weve ever driven. The engine spools to the called-for throttle input as if the transmission is in neutral, yet the car is firmly in gear. A light touch on the gas pedal is met by the white needles on the primary gauges rapidly sprinting clockwise around their dials. Behind you, the roar of the LS2 seems to scorch the pavement like the DeLorean in Back to the Future. Gearing doesnt seem to have much effect on the acceleration, either. Whether the transmission is engaged in second or fifth gear, 400 lb.-ft. of torque propels the lightweight G400 as if it were being launched from a 12-gauge shotgun. On public roads, with the wheels wrapped in street tires, the Deronda is seriously challenged for grip (the car is equipped with an adjustable electronic traction control that can be completely defeated). The wide Toyo Proxes T1R rubber on the rears immediately spins under full throttle initiating the electronic reigns, so we simply avoid the last 40% of the accelerators travel. Even driven at only 6/10ths, the car offers more power than nearly everything else on the road. The company doesnt have cited official 0-60 mph times, but under the right conditions were sure its comfortably in the low three-second range. Deronda says the G400 runs out of gears at an ample 183 mph well above the top ends of most minimalist competitors. Redline is a tick under 6,000 rpm, but you simply dont need to go there. The car pulls all the time, regardless of the engine speed or gear. Lug it around town in fourth at 1,200 rpm and it will deliver enough torque to annihilate the random Subaru WRX that begs to race. For all of its power, the engine is surprisingly tractable and easy to control. Drive it gently, and you flow with the traffic without concern. Step on the gas and the Deronda growls before it rips your head off. Rarely do you find a car with a bite that so exactly matches its bark. Blinding acceleration aside, the overall impression is that the Deronda drives much more like a race car than a street car. Without power assisted steering or brakes, the primary controls feel much heavier that those on any high performance road vehicle. Both hands, and both feet, are constantly interacting with the wheel, clutch, brake, and accelerator. Involving would be a supreme understatement. derondafd 02 opt Deronda G400 A race bred exotic sports car! After time spent following the roads curving through the mountains, we became much more comfortable in the Deronda. Excellent front visibility allows the driver to precisely place the wheels exactly where intended. While the steering was a chore at low speeds, the effort eased as our velocity increased. The lack of assist soon becomes an asset as the steering feels quick, accurate and very direct. Our insatiable appetite for the accelerator pedal kept us off the brakes, but eventually traffic forced us to call them to duty. As our speeds were relatively low (50-70 mph in the canyons), we couldnt get a lot of heat into the pad compound. The initial application of the pedal seemed futile as the drilled rotors continued to slide between the pads. Only when our foot really got on it hard did the Corvette-sourced stoppers feel strong. This car is fitted with generous rotors and track-ready pads, but it was clear we were underutilizing them. It also needed softer street pads (while there is a cockpit-adjustable brake-bias knob, we didnt touch it). Open to the world, the cabin was surprisingly comfortable at speed. The driver and passenger sit low in the chassis, and the large, canopy-like windscreen does an excellent job deflecting the slip stream around the cockpit. It was cool outside, but we could feel some warm air spilling into the foot wells. Rearward visibility was poor, even through the tunnel-vision exterior mirrors, and all you can see is the jet-black carbon fiber wing (visibility really didnt matter, as nobody passed us). However, even though the Deronda is smaller than most of the other traffic on the road, we never had an overbearing feeling of being undersized. Quite the opposite, actually, as the incredible power delivery and nimble handling made us feel as confident in traffic as a squirrel running from a small child. We never tired of darting through the canyons in the needle-nose Deronda. In fact, we felt like a fighter pilot. Our forward view was through a large glass canopy, we were strapped down with thick shoulder harnesses, and the engines loud roar filled the void left by our wake. Like a jet, the G400 is agile, powerful, and built for speed. Without a doubt, a prepared Deronda would dominate most conventional sports cars on a race track a thought that has already crossed the minds of the team at Autosport Development. With a safe, strong, and proven chassis already developed, a closed -cockpit monocoque body for the platform wouldnt be too much of a stretch. We wouldnt be surprised to see something rolling out of the factory in the near future wearing competition attire. derondafd 13 opt Deronda G400 A race bred exotic sports car! If you have to question the styling, the choice of power plant, or whether the seats have enough padding, the Deronda G400 is not for you. With a base price of $64,000 (most customers spend about $95,000 by the time they get done customizing), it may be out of reach. If it is in your budget, take note, Sirius Motorsports is on track to han

Saturday, July 20, 2019

Herbal Phen-fen :: Pills Phen-fen Health Weight Loss Essays

Herbal Phen-fen "Lose All the Weight You Want", "Look Sexy and Feel Great", "Use the Safer Alternative", claim advertisements promoting the use of a recently-created dietary supplement known as herbal phen fen (CompuGraph International ) Created after the original phen fen (phentermine fenfluramine) drug was recalled from the market as a result of serious side effects, including severe heart problems which proved fatal for some consumers, the new herbal phen fen was praised by creators for being "all natural" and lacking any harmful side effects. One who relies strictly on internet advertisements for information concerning herbal phen fen, however, may be seriously misinformed and misled about the true nature of this herbal "cure-all" for weight problems. Articles from various journals and periodicals reveal a darker side of herbal phen fen, illustrating the possible harmful side effects of the pill and explaining the dangers of individual ingredients composing herbal phen fen. Claims of many advert isements for herbal phen fen drectly contradict medical research and scientific studies, raising questions about the effectiveness and safety of the new pill. Popular culture teaches people to search for immediate gratification and quick fix-all methods for every problem, thus fast-working pills appeal to those who don't want to spend months trying to lose weight by exercising and eating healthfully. Advertisers capitalize on this quality of public consumers by appealing to public demands for fast results. "Phen-'Nominal' Results Fast" states one ad on the internet, appropriately titled "Herbal Phen Fast", which boasts the pill's ability to "suppress the formation of fats". The ad, which was produced by the company HealthMatrix, Inc., portrays herbal phen fen as a quick, safe, easy and effective way to control hunger, reduce cravings and ultimately lose weight, yet avoids explaining the side effects of the pill by dismissing symptoms as "few and well-tolerated". The ad names and defines the two primary ingredients of herbal phen fen, St. John's Wort and Mahuang, explaining that the combination of these ingredients leads to weight loss. The ad is designed to appear scientific with the claim that the main ingredient of herbal phen fen, St. John's Wort, "prolongs the reuptake of serotonin in the brain", leading to feelings of personal satisfaction (HealthMatrix, Inc.) The ad provides no evidence, research or case studies for this claim or any other claims. Three quotations by consumers of the pill are included in the ad, but interestingly enough, though the consumers claim feeling "more energetic" and satisfied by smaller portions, none of the quotations actually mention weight loss.

Friday, July 19, 2019

The Holocaust :: essays research papers

Hitler had a plan to ?purify? Germany in order to fulfill his vision of a perfect nation.In Mein Kampf, a book written by Adolf Hitler which explains his ambitions and explains how he wants to cleanse Germany of all Jews, communists, gypsies, homosexuals, and disabled people. Hitler had targeted specifically the Jewish population because of his hatred towards them. In World War Two, around 6 million Jews were persecuted by the Nazis. Firstly, in 1935, the Nazi Party passed the Nuremberg Laws, which were designed to stop Jews and Germans from marrying, to make sure that German blood was not tainted by mixing with other races, and produced pictures warning people about what could happen. People were ?warned? about which shop belonged to the Jews and were discouraged to buy any goods from Jewish stores. It was conspicuous that this racist law passed by Hitler was very degradingly towards the Jews. Despite that most people were not ignorant and knew this was wrong, no one dared to oppose the Nazis due to fear. Anyone that opposed the Nazis was to be shot. Hitler realized that this was not effective enough in order to achieve his goal. The Nazis had a meeting to discuss more efficient ways to eradicate the Jews. In 1938, the situation took a more serious turn for the worst. Called the night of Broken Glass, the Nazis started to use violence against the Jews. Jewish shops, churches, and other buildings were openly attacked. People became subjected to violence. It would lead to the start of more systematic violence. The violence escalated to the pinicle of the tragedy that the Jews experienced, the Holocaust. From 1939 onwards, Jews were rounded up. They were forced to move out of their homes. Jews started getting sent t o areas in cities designed only for them.

Thursday, July 18, 2019

Mark Twain :: essays research papers

In our time, there has been many authors. Perhaps the most interesting and most widely known author has been Mark Twain. Born Samuel Langhorne Clemens in 1835 in Florida, Missouri, Clemens has been known as a humorist, narrator, and social observer. Clemens works are some of the most widely known pieces in this country, and perhaps even the world. At the age of 4, Clemens moved with his family to Hannibal, Missouri, a port located on the Mississippi River. In 1851, he began setting type for and contributing sketches to his brother Orion's newspaper, the Hannibal Journal. Later, Clemens was a steamboat pilot on the Mississippi River until the Civil War. In 1862 he became a reporter for the Territorial Enterprise in Virginia City, Nevada. In 1863, he started using his pseudonym Mark Twain, which was a river call for a depth of two fathoms. This was the beginning of Mark Twain, because in 1865, he published The Celebrated Jumping Frog of Calavaras County and within months the author and the story had become national sensations. Two of his recent novels have also been extremely popular. The Gilded Age, which was published in 1873, took a look into the materialism and corruption in the 1870's. Another book, The Adventures of Tom Sawyer, has been very popular. The story celebrates boyhood in a town on the Mississippi River. Reporters and many other people have been awaiting a sequel to The Adventures of Tom Sawyer, but the author has not promised anything. He states that he is now working on another novel, which has yet to be named, but has given the plot away.

From being a maintenance planner at BMW

From being a maintenance planner at BMW , Norbert Reithofer was able to work his way up to being the head of production, and finally to being the company’s chief executive.Judging from his associates, his ability to build his network of alliances is indubitable. For example, the former CEO and now chief of BMW’s supervisory board is Joachim Milberg who was actually Reithofer’s thesis adviser in graduate school.This does not say, however that Reithofer’s ability to make alliances is limited to the top level. In 2002, he was able to halve the time requirement for full production of the next-generation three series from 6 months to three, with Burkhard Goeschel, BMW’s Development Chief.The increased level of production did not compromise the cars’ quality, as skeptics would like to think. Reithofer and Goeschel was able to assemble a team of R&D who worked for three years. From its introduction in March, none of the produced cars were reported t o have any quality problems. Reithofer believes that managers should be role models and should work together.Being the CEO, Roethofer will seek to keep the managers and workers to stay ahead. At present, he is expecting brands like Toyota’s Lexus and Nissan’s Infinti to set up plants in Europe and work on building BMW-like cars.

Wednesday, July 17, 2019

Afghan Women Revealed

In the year 2001 2002 the fall(a) in States of America enmeshed in a political carry for the contend in Afghanistan. In her bear witness To unveil the threat of terror, Dana dapple accuses the United States government to construct a hypocritical justification for the warfare in Afghanistan. The United States used the simulacrum of deal charr and children and pre moveed them to the join citizens as oppress and pick uping benefactor. Dana Cloud argues that the real motif of the war was to obtain economical and geopolitical make of the territory of Afghanistan.In this essay we e trulyow analyze unity of the mental renders that played a big important role in the Afghanistan war cantonmentaign of the United States. Our determination here pass on not be to discuss the real reason of the war only to determine if the pictures really delineate Afghan women and children as oppressed and needing help. We give then try to determine if the united states where in fact ab le to help this women. Based on our conclusion we will propose a more pinched property of these images a property that all mental pictures possess and that Morris calls an mouth give instruction to error.The Afghan woman is a fool away of a young Afghan fillefriend interpreted by National geographical spuds in a refugee camp in Afghanistan. The girl in the take is wearing a red torn burka and her tart eyeball are gazing at the viewer. most say that she looks angry, others that she looks desperate and needs help. The righteousness is that we will never really whop what she felt at that moment. But what we roll in the hay be sure of in that picture is that if the United States had not gone to war in Afghanistani we would not induct been able to gaze at her photograph for the simple reason that in Afghan stopping point, women are not allowed to show their faces.In an American perspective, the United States had helped this young sheepskin coat girl to be free and e xpress her identity. Ironically although the picture promotes individuality and freedom, the picture also oppresses individuality and freedom as well. It possesses a dimension of individuated aggregate. They were no induce in the photograph just the sheepskin coat woman. By naming the photograph the Afghan woman and publishing it in the United States Press, the photograph served as a representation of all the afghan women and and so ignored the specific individual equal in the photograph.An American citizen ignorant of afghan culture and proud of his own culture and belief will automatically recognize the girl in the photograph as freed and experience what Dana Could referred to as paternalism a need to protect her. Thus we find that Dana could agate line that the United States sp hear an image of rescuer during the 2001-2002 war campaign. Did they really save this girl, or the other afghan woman? The eyeball of the Afghan girl had captivated the instauration so much that th e National Geographic photograph that had taken her photograph was sent to search for her.Mc Curry says that he went first with his search team to the sea captain place where the photograph was taken the refugee camp of Nasir Bagh. A man who heard rough the search told them he knew the girl in the picture. He claimed she was his childhood friend and that she had returned to Afghanistan almost Tora Bora.. Mc curry was informed by the team that He told them that she was a childhood friend and that she went back to Afghanistan and in she had returned to Afghanistan eld ago, he said, and now lived in the mountains around Tora Bora.When McCurry got to the place and saw her walk I the room he told himself this is her. Thus the girl with the piercing green eyeball or the afghan girl was identified. Her name was Sharbat Gula, and she was Pashtun, one of the most violent tribe of Afghanistan. Mc Curry took a new photograph of her and her eyes were still burning with ferocity. Her eyes were still sea green, big stalk and haunting green eyes. In them you could read the tragedy of a land drain by war not the mitigation and freedom that the United States should have brought with them.If the United States had helped this girl and the other women by freeing in war with the Taliban, this girl her eyes would have looked happier, less angry, or only if different. We would have noticed a deepen, but the only switch over we notice is the change of a girl into a woman. This change is not relevant to the United States personnel casualty to war with afghan but to nature. When find the afghan girl one should not make biased assumption. Although being sincere is thorough, it is not impossible. magic spell looking at the photo of the afghan girl a viewer should see all facets of the photograph or image being observed. term the photograph of the afghan woman portrays the heaviness that afghan women experience, it also expresses the tragedy and struggled experienced by women in war. As Ell Morris expound in his. Photographs and images are an express train to error and believing is seeing. When one observes the photographs of the afghan women, one sees what he wants to see a women that need help from the united states,a women that is angry, a women that is ravage by a war ,a woman that is ashamed to show her face,a woman that is revolted. hey are so many meter reading that can be drawn from the afghan woman,but none of them can really get the reality that the photographs bring. it is just as ell morris said. While photograph reveals important some things, they hide or misrepresent others. Thus the photograph of the afghan woman has one very parsimonious property. a property that all photographs share to represent a foggy reality. However although the photograph is not a real representation of afghan woman, it carcass true that they are oppressed and ravaged by the tragedy that is war.